• "H" Class Refuse Drag Chains
  • Dimensions<!--H Class Refuse Drag Chains-->
Allied-Locke "H" Class Refuse Drag Chain is used for conveying abrasive waste materials through wooden or steel troughs. Because of this large, wide opening area, this chain provides sizeable carrying capacity when operated at moderate speeds. Links should always be run in the direction of the closed barrel.

Dimensions are given in inches.
1 - 7 of 7 | Results Per Page | View | Unit of Measure
1 
Request Information Compare Items

Item #

Pitch

Max. Allowable Sprocket Face (A)

Diameter of Pin (E)

Height of Sidebar (H)

Overall Width (N)

Overall Length of Barrel (X)

Max. Recommended Working Load

N/A 5.000 N/A 6.38 N/A 0.625 N/A 1.50 N/A 9.75 N/A 7.75 N/A 6,100 lb
N/A 6.000 N/A 4.12 N/A 0.625 N/A 1.50 N/A 7.50 N/A 5.31 N/A 6,100 lb
N/A 6.000 N/A 9.00 N/A 0.625 N/A 1.50 N/A 12.50 N/A 10.62 N/A 6,100 lb
N/A 8.000 N/A 9.00 N/A 0.625 N/A 1.50 N/A 12.50 N/A 10.62 N/A 6,100 lb
N/A 8.000 N/A 13.00 N/A 0.625 N/A 1.62 N/A 16.38 N/A 14.44 N/A 6,100 lb
N/A 6.000 N/A 8.75 N/A 0.750 N/A 2.00 N/A 12.88 N/A 10.19 N/A 8,200 lb
N/A 8.000 N/A 11.12 N/A 0.750 N/A 2.00 N/A 16.00 N/A 12.69 N/A 8,650 lb
1 - 7 of 7 | Results Per Page | View | Unit of Measure
1