Allied-Locke "H" Class Refuse Drag Chain is used for conveying abrasive waste materials through wooden or steel troughs. Because of this large, wide opening area, this chain provides sizeable carrying capacity when operated at moderate speeds. Links should always be run in the direction of the closed barrel.

Dimensions are given in inches.
Request Information
Unit of Measure
Items
"H" Class Refuse Drag Chains

"H" Class Refuse Drag Chain
"H" Class Refuse Drag Chains

"H" Class Refuse Drag Chain
"H" Class Refuse Drag Chains

"H" Class Refuse Drag Chain
"H" Class Refuse Drag Chains

"H" Class Refuse Drag Chain
"H" Class Refuse Drag Chains

"H" Class Refuse Drag Chain
Pitch N/A 5.000 N/A 6.000 N/A 6.000 N/A 8.000 N/A 8.000
Max. Allowable Sprocket Face (A) N/A 6.38 N/A 4.12 N/A 9.00 N/A 9.00 N/A 13.00
Diameter of Pin (E) N/A 0.625
Height of Sidebar (H) N/A 1.50 N/A 1.50 N/A 1.50 N/A 1.50 N/A 1.62
Overall Width (N) N/A 9.75 N/A 7.50 N/A 12.50 N/A 12.50 N/A 16.38
Overall Length of Barrel (X) N/A 7.75 N/A 5.31 N/A 10.62 N/A 10.62 N/A 14.44
Max. Recommended Working Load N/A 6,100 lb
Avg. Ultimate Strength N/A 36,400 lb
Links per 10' N/A 24 N/A 20 N/A 20 N/A 15 N/A 15
Weight N/A 10.7 lb/ft N/A 8.0 lb/ft N/A 12.9 lb/ft N/A 10.8 lb/ft N/A 14.6 lb/ft
Cast Links N/A Allied-Locke Promal
Pins N/A Carbon Steel, Heat-Treated
Note N/A
  • Available in riveted construction only.
  • These links should always be run in the direction of the closed barrel.
    • Applications Served N/A conveyors forest products high-temperature industrial ovens produce washdown sugar harvesting water treatment