Allied-Locke "H" Class Refuse Drag Chain is used for conveying abrasive waste materials through wooden or steel troughs. Because of this large, wide opening area, this chain provides sizeable carrying capacity when operated at moderate speeds. Links should always be run in the direction of the closed barrel.
Dimensions are given in inches.
Dimensions are given in inches.
Unit of Measure
Specifications
Pitch |
N/A 5.000 |
Max. Allowable Sprocket Face (A) |
N/A 6.38 |
Diameter of Pin (E) |
N/A 0.625 |
Height of Sidebar (H) |
N/A 1.50 |
Overall Width (N) |
N/A 9.75 |
Overall Length of Barrel (X) |
N/A 7.75 |
Max. Recommended Working Load |
N/A 6,100 lb |
Avg. Ultimate Strength |
N/A 36,400 lb |
Links per 10' |
N/A 24 |
Weight |
N/A 10.7 lb/ft |
Cast Links |
N/A Allied-Locke Promal |
Pins |
N/A Carbon Steel, Heat-Treated |
Note |
N/A
|
