Welded Mill Chains
Welded Steel Chains
Welded steel mill chains are recommended for most conveying, driving, and elevating applications where a high-strength steel rollerless chain is required. These chains will operate on the same sprockets as their cast chain counterparts.
WHX Series is available for many welded steel chains. WHX series have with induction hardened pins or rivets, which give a much harder surface to the bearing area of the pin. Induction hardened pins maintain a level of ductility with their thru-hardened cores.
The direction of travel for welded mill chain is determined by the application. If used in a conveyor application, the direction should be with the widest, or the open end first. If used as a drive chain, the closed end, or the end with the barrel, should be first.
Dimensions are given in inches.
WHX Series is available for many welded steel chains. WHX series have with induction hardened pins or rivets, which give a much harder surface to the bearing area of the pin. Induction hardened pins maintain a level of ductility with their thru-hardened cores.
The direction of travel for welded mill chain is determined by the application. If used in a conveyor application, the direction should be with the widest, or the open end first. If used as a drive chain, the closed end, or the end with the barrel, should be first.
Dimensions are given in inches.
Item # |
Pitch (P) |
Rivet Diameter (D) |
Side Bar Width (F) |
Barrel Diameter (H) |
Max. Sprocket Face (A) |
Length of Bearing (X) |
Max. Recommended Working Load |
---|---|---|---|---|---|---|---|
WH188 WH188/Asset/Welded%20Steel%20Soft%20Bend.jpg | Pitch (P) N/A 2.609 | Rivet Diameter (D) N/A 0.500 | Side Bar Width (F) N/A 1.12 | Barrel Diameter (H) N/A 0.88 | Max. Sprocket Face (A) N/A 0.88 | Length of Bearing (X) N/A 1.62 | Max. Recommended Working Load N/A 2,850 lb |
WH78 WH78/Asset/Welded-Steel-Soft-Bend.jpg | Pitch (P) N/A 2.609 | Rivet Diameter (D) N/A 0.500 | Side Bar Width (F) N/A 1.12 | Barrel Diameter (H) N/A 0.88 | Max. Sprocket Face (A) N/A 1.12 | Length of Bearing (X) N/A 2.00 | Max. Recommended Working Load N/A 3,500 lb |
WH78-4 WH78-4/Asset/Welded%20Steel%20Soft%20Bend.jpg | Pitch (P) N/A 4.000 | Rivet Diameter (D) N/A 0.500 | Side Bar Width (F) N/A 1.12 | Barrel Diameter (H) N/A 0.88 | Max. Sprocket Face (A) N/A 1.12 | Length of Bearing (X) N/A 2.00 | Max. Recommended Working Load N/A 3,500 lb |
WH82 WH82/Asset/Welded%20Steel%20Soft%20Bend.jpg | Pitch (P) N/A 3.075 | Rivet Diameter (D) N/A 0.560 | Side Bar Width (F) N/A 1.250 | Barrel Diameter (H) N/A 1.06 | Max. Sprocket Face (A) N/A 1.25 | Length of Bearing (X) N/A 2.25 | Max. Recommended Working Load N/A 4,400 lb |
WH124 WH124/Asset/Welded%20Steel%20Soft%20Bend.jpg | Pitch (P) N/A 4.000 | Rivet Diameter (D) N/A 0.750 | Side Bar Width (F) N/A 1.50 | Barrel Diameter (H) N/A 1.25 | Max. Sprocket Face (A) N/A 1.50 | Length of Bearing (X) N/A 2.75 | Max. Recommended Working Load N/A 7,200 lb |
WH124HD WH124HD/Asset/Welded%20Steel%20Soft%20Bend.jpg | Pitch (P) N/A 4.063 | Rivet Diameter (D) N/A 1.00 | Side Bar Width (F) N/A 2.00 | Barrel Diameter (H) N/A 1.62 | Max. Sprocket Face (A) N/A 1.62 | Length of Bearing (X) N/A 3.00 | Max. Recommended Working Load N/A 10,500 lb |
WH111 WH111/Asset/Welded Steel Hard Bend.jpg | Pitch (P) N/A 4.760 | Rivet Diameter (D) N/A 0.750 | Side Bar Width (F) N/A 1.75 | Barrel Diameter (H) N/A 1.25 | Max. Sprocket Face (A) N/A 2.00 | Length of Bearing (X) N/A 3.38 | Max. Recommended Working Load N/A 8,850 lb |
WH106 WH106/Asset/Welded Steel Hard Bend.jpg | Pitch (P) N/A 6.000 | Rivet Diameter (D) N/A 0.750 | Side Bar Width (F) N/A 1.50 | Barrel Diameter (H) N/A 1.25 | Max. Sprocket Face (A) N/A 1.62 | Length of Bearing (X) N/A 2.75 | Max. Recommended Working Load N/A 7,200 lb |
WH106HD WH106HD/Asset/Welded Steel Hard Bend.jpg | Pitch (P) N/A 6.000 | Rivet Diameter (D) N/A 0.750 | Side Bar Width (F) N/A 1.50 | Barrel Diameter (H) N/A 1.25 | Max. Sprocket Face (A) N/A 1.62 | Length of Bearing (X) N/A 3.00 | Max. Recommended Working Load N/A 7,875 lb |
WH106XHD WH106XHD/Asset/Welded Steel Hard Bend.jpg | Pitch (P) N/A 6.050 | Rivet Diameter (D) N/A 1.00 | Side Bar Width (F) N/A 2.00 | Barrel Diameter (H) N/A 1.62 | Max. Sprocket Face (A) N/A 1.62 | Length of Bearing (X) N/A 3.00 | Max. Recommended Working Load N/A 10,500 lb |
WH110 WH110/Asset/Welded Steel Hard Bend.jpg | Pitch (P) N/A 6.000 | Rivet Diameter (D) N/A 0.750 | Side Bar Width (F) N/A 1.50 | Barrel Diameter (H) N/A 1.25 | Max. Sprocket Face (A) N/A 1.88 | Length of Bearing (X) N/A 3.00 | Max. Recommended Working Load N/A 7,875 lb |
WH132 WH132/Asset/Welded Steel Hard Bend.jpg | Pitch (P) N/A 6.050 | Rivet Diameter (D) N/A 1.00 | Side Bar Width (F) N/A 2.00 | Barrel Diameter (H) N/A 1.62 | Max. Sprocket Face (A) N/A 2.88 | Length of Bearing (X) N/A 4.38 | Max. Recommended Working Load N/A 15,300 lb |
WH132HD WH132HD/Asset/Welded Steel Hard Bend.jpg | Pitch (P) N/A 6.050 | Rivet Diameter (D) N/A 1.00 | Side Bar Width (F) N/A 2.00 | Barrel Diameter (H) N/A 1.62 | Max. Sprocket Face (A) N/A 2.88 | Length of Bearing (X) N/A 4.62 | Max. Recommended Working Load N/A 16,200 lb |
WH150 WH150/Asset/Welded Steel Hard Bend.jpg | Pitch (P) N/A 6.050 | Rivet Diameter (D) N/A 1.00 | Side Bar Width (F) N/A 2.50 | Barrel Diameter (H) N/A 1.62 | Max. Sprocket Face (A) N/A 2.88 | Length of Bearing (X) N/A 4.38 | Max. Recommended Working Load N/A 15,300 lb |
WH150HD WH150HD/Asset/Welded Steel Hard Bend.jpg | Pitch (P) N/A 6.050 | Rivet Diameter (D) N/A 1.00 | Side Bar Width (F) N/A 2.50 | Barrel Diameter (H) N/A 1.62 | Max. Sprocket Face (A) N/A 2.88 | Length of Bearing (X) N/A 4.62 | Max. Recommended Working Load N/A 16,200 lb |
WH150XHD WH150XHD/Asset/Welded Steel Hard Bend.jpg | Pitch (P) N/A 6.050 | Rivet Diameter (D) N/A 1.12 | Side Bar Width (F) N/A 2.50 | Barrel Diameter (H) N/A 1.62 | Max. Sprocket Face (A) N/A 2.88 | Length of Bearing (X) N/A 4.62 | Max. Recommended Working Load N/A 18,200 lb |
WH155 WH155/Asset/Welded Steel Hard Bend.jpg | Pitch (P) N/A 6.050 | Rivet Diameter (D) N/A 1.12 | Side Bar Width (F) N/A 2.50 | Barrel Diameter (H) N/A 1.75 | Max. Sprocket Face (A) N/A 3.00 | Length of Bearing (X) N/A 4.50 | Max. Recommended Working Load N/A 17,750 lb |
WH159 WH159/Asset/Welded%20Steel%20Soft%20Bend.jpg | Pitch (P) N/A 6.125 | Rivet Diameter (D) N/A 1.25 | Side Bar Width (F) N/A 3.00 | Barrel Diameter (H) N/A 2.00 | Max. Sprocket Face (A) N/A 3.00 | Length of Bearing (X) N/A 4.63 | Max. Recommended Working Load N/A 20,250 lb |