Print Back
Welded steel mill chains are recommended for most conveying, driving, and elevating applications where a high-strength steel rollerless chain is required. These chains will operate on the same sprockets as their cast chain counterparts.

WHX Series is available for many welded steel chains. WHX series have with induction hardened pins or rivets, which give a much harder surface to the bearing area of the pin. Induction hardened pins maintain a level of ductility with their thru-hardened cores.

The direction of travel for welded mill chain is determined by the application. If used in a conveyor application, the direction should be with the widest, or the open end first. If used as a drive chain, the closed end, or the end with the barrel, should be first.

Dimensions are given in inches.
Wh124 Plain Chain
Unit of Measure
1 

Item #

Pitch (P)

Rivet Diameter (D)

Side Bar Width (F)

Barrel Diameter (H)

Max. Sprocket Face (A)

Length of Bearing (X)

Max. Recommended Working Load

WH188 N/A 2.609 N/A 0.500 N/A 1.12 N/A 0.88 N/A 0.88 N/A 1.62 N/A 2,850 lb
WH78 N/A 2.609 N/A 0.500 N/A 1.12 N/A 0.88 N/A 1.12 N/A 2.00 N/A 3,500 lb
WH78-4 N/A 4.000 N/A 0.500 N/A 1.12 N/A 0.88 N/A 1.12 N/A 2.00 N/A 3,500 lb
WH82 N/A 3.075 N/A 0.560 N/A 1.250 N/A 1.06 N/A 1.25 N/A 2.25 N/A 4,400 lb
WH124 N/A 4.000 N/A 0.750 N/A 1.50 N/A 1.25 N/A 1.50 N/A 2.75 N/A 7,200 lb
WH124HD N/A 4.063 N/A 1.00 N/A 2.00 N/A 1.62 N/A 1.62 N/A 3.00 N/A 10,500 lb
WH111 N/A 4.760 N/A 0.750 N/A 1.75 N/A 1.25 N/A 2.00 N/A 3.38 N/A 8,850 lb
WH106 N/A 6.000 N/A 0.750 N/A 1.50 N/A 1.25 N/A 1.62 N/A 2.75 N/A 7,200 lb
WH106HD N/A 6.000 N/A 0.750 N/A 1.50 N/A 1.25 N/A 1.62 N/A 3.00 N/A 7,875 lb
WH106XHD N/A 6.050 N/A 1.00 N/A 2.00 N/A 1.62 N/A 1.62 N/A 3.00 N/A 10,500 lb
WH110 N/A 6.000 N/A 0.750 N/A 1.50 N/A 1.25 N/A 1.88 N/A 3.00 N/A 7,875 lb
WH132 N/A 6.050 N/A 1.00 N/A 2.00 N/A 1.62 N/A 2.88 N/A 4.38 N/A 15,300 lb
WH132HD N/A 6.050 N/A 1.00 N/A 2.00 N/A 1.62 N/A 2.88 N/A 4.62 N/A 16,200 lb
WH150 N/A 6.050 N/A 1.00 N/A 2.50 N/A 1.62 N/A 2.88 N/A 4.38 N/A 15,300 lb
WH150HD N/A 6.050 N/A 1.00 N/A 2.50 N/A 1.62 N/A 2.88 N/A 4.62 N/A 16,200 lb
WH150XHD N/A 6.050 N/A 1.12 N/A 2.50 N/A 1.62 N/A 2.88 N/A 4.62 N/A 18,200 lb
WH155 N/A 6.050 N/A 1.12 N/A 2.50 N/A 1.75 N/A 3.00 N/A 4.50 N/A 17,750 lb
WH159 N/A 6.125 N/A 1.25 N/A 3.00 N/A 2.00 N/A 3.00 N/A 4.63 N/A 20,250 lb
Unit of Measure
1