Allied-Locke Indusries
Allied-Locke Indusries
1088 Corregidor, Green River
Industrial Park, Dixon, IL 61021
Toll Free: 800-435-7752
Email: info@alliedlocke.com
Print Back
Allied-Locke "H" Class Refuse Drag Chain is used for conveying abrasive waste materials through wooden or steel troughs. Because of this large, wide opening area, this chain provides sizeable carrying capacity when operated at moderate speeds. Links should always be run in the direction of the closed barrel.

Dimensions are given in inches.
Unit of Measure

Specifications

Pitch

 N/A 6.000

Max. Allowable Sprocket Face (A)

 N/A 9.00

Diameter of Pin (E)

 N/A 0.625

Height of Sidebar (H)

 N/A 1.50

Overall Width (N)

 N/A 12.50

Overall Length of Barrel (X)

 N/A 10.62

Max. Recommended Working Load

 N/A 6,100 lb

Avg. Ultimate Strength

 N/A 36,400 lb

Links per 10'

 N/A 20

Weight

 N/A 12.9 lb/ft

Cast Links

 N/A Allied-Locke Promal

Pins

 N/A Carbon Steel, Heat-Treated

Note

 N/A
  • Available in riveted construction only.
  • These links should always be run in the direction of the closed barrel.

    • Applications Served

    N/A conveyors forest products high-temperature industrial ovens produce washdown sugar harvesting water treatment