Dimensions are given in inches.
1 - 25 of 40 | Results Per Page | View | Unit of Measure
1 2 

Item #

Type

Pitch (P)

From Hole C.L. to Pin C.L. (C)

Hole Diameter (D)

From Top to Pin C.L. (F)

Extension Width (H)

N/A Straight, One Side, One Hole N/A .375 N/A 0.375 N/A 0.109 N/A 0.578 N/A 0.722
N/A Straight, One Side, One Hole N/A .500 N/A 0.500 N/A 0.140 N/A 0.681 N/A 0.910
N/A Straight, One Side, One Hole N/A 0.625 N/A 0.625 N/A 0.203 N/A 0.969 N/A 1.131
N/A Straight, One Side, One Hole N/A .750 N/A 0.719 N/A 0.203 N/A 1.028 N/A 1.428
N/A Straight, One Side, One Hole N/A 1.000 N/A 0.969 N/A 0.265 N/A 1.349 N/A 1.916
N/A Straight, One Side, Two Holes N/A .375 N/A 0.375 N/A 0.109 N/A 0.578 N/A 0.722
N/A Straight, One Side, Two Holes N/A .500 N/A 0.500 N/A 0.140 N/A 0.681 N/A 0.910
N/A Straight, One Side, Two Holes N/A 0.625 N/A 0.625 N/A 0.203 N/A 0.969 N/A 1.131
N/A Straight, One Side, Two Holes N/A .750 N/A 0.719 N/A 0.203 N/A 1.028 N/A 1.428
N/A Straight, One Side, Two Holes N/A 1.000 N/A 0.969 N/A 0.265 N/A 1.349 N/A 1.916
N/A Straight, Two Sides, One Hole N/A .375 N/A 0.375 N/A 0.109 N/A 0.578 N/A 0.722
N/A Straight, Two Sides, One Hole N/A .500 N/A 0.500 N/A 0.140 N/A 0.681 N/A 0.910
N/A Straight, Two Sides, One Hole N/A 0.625 N/A 0.625 N/A 0.203 N/A 0.969 N/A 1.131
N/A Straight, Two Sides, One Hole N/A .750 N/A 0.719 N/A 0.203 N/A 1.028 N/A 1.428
N/A Straight, Two Sides, One Hole N/A 1.000 N/A 0.969 N/A 0.265 N/A 1.349 N/A 1.916
N/A Straight, Two Sides, Two Holes N/A .375 N/A 0.375 N/A 0.109 N/A 0.578 N/A 0.722
N/A Straight, Two Sides, Two Holes N/A .500 N/A 0.500 N/A 0.140 N/A 0.681 N/A 0.910
N/A Straight, Two Sides, Two Holes N/A 0.625 N/A 0.625 N/A 0.203 N/A 0.969 N/A 1.131
N/A Straight, Two Sides, Two Holes N/A .750 N/A 0.719 N/A 0.203 N/A 1.028 N/A 1.428
N/A Straight, Two Sides, Two Holes N/A 1.000 N/A 0.969 N/A 0.265 N/A 1.349 N/A 1.916
N/A Bent, One Side, One Hole N/A .375 N/A 0.375 N/A 0.250 N/A 0.109 N/A 0.722
N/A Bent, One Side, One Hole N/A .500 N/A 0.500 N/A 0.312 N/A 0.140 N/A 0.910
N/A Bent, One Side, One Hole N/A 0.625 N/A 0.625 N/A 0.406 N/A 0.203 N/A 1.131
N/A Bent, One Side, One Hole N/A .750 N/A 0.750 N/A 0.469 N/A 0.203 N/A 1.428
N/A Bent, One Side, One Hole N/A 1.000 N/A 1.000 N/A 0.625 N/A 0.265 N/A 1.916
1 - 25 of 40 | Results Per Page | View | Unit of Measure
1 2