Welded Mill Chains On Allied-Locke Industries

ISO 9001 - Registered Quality System Dixon, IL


	Welded Mill Chains
	Check up to five results to perform an action.

	larger image		Welded steel mill chains are recommended for most conveying, driving, and elevating applications where a high-strength steel rollerless chain is required. These chains will operate on the same sprockets as their cast chain counterparts. WHX Series is available for many welded steel chains. WHX series have with induction hardened pins or rivets, which give a much harder surface to the bearing area of the pin. Induction hardened pins maintain a level of ductility with their thru-hardened cores. The direction of travel for welded mill chain is determined by the application. If used in a conveyor application, the direction should be with the widest, or the open end first. If used as a drive chain, the closed end, or the end with the barrel, should be first. Dimensions are given in inches.

Results Per Page :

Item #	Pitch (P)	Rivet Diameter (D)	Side Bar Width (F)	Barrel Diameter (H)	Max. Sprocket Face (A)	Length of Bearing (X)	Max. Recommended Working Load

WH188	2.609	0.500	1.12	0.88	0.88	1.62	2,850 lb

WH78	2.609	0.500	1.12	0.88	1.12	2.00	3,500 lb

WH78-4	4.000	0.500	1.12	0.88	1.12	2.00	3,500 lb

WH82	3.075	0.560	1.250	1.06	1.25	2.25	4,400 lb

WH124	4.000	0.750	1.50	1.25	1.50	2.75	7,200 lb

WH124HD	4.063	1.00	2.00	1.62	1.62	3.00	10,500 lb

WH111	4.760	0.750	1.75	1.25	2.00	3.38	8,850 lb

WH106	6.000	0.750	1.50	1.25	1.62	2.75	7,200 lb

WH106HD	6.000	0.750	1.50	1.25	1.62	3.00	7,875 lb

WH106XHD	6.050	1.00	2.00	1.62	1.62	3.00	10,500 lb

WH110	6.000	0.750	1.50	1.25	1.88	3.00	7,875 lb

WH132	6.050	1.00	2.00	1.62	2.88	4.38	15,300 lb

WH132HD	6.050	1.00	2.00	1.62	2.88	4.62	16,200 lb

WH150	6.050	1.00	2.50	1.62	2.88	4.38	15,300 lb

WH150HD	6.050	1.00	2.50	1.62	2.88	4.62	16,200 lb

WH150XHD	6.050	1.12	2.50	1.62	2.88	4.62	18,200 lb

WH155	6.050	1.12	2.50	1.75	3.00	4.50	17,750 lb

WH159	6.125	1.25	3.00	2.00	3.00	4.63	20,250 lb