• Two Piece welded barrel construction-provides more rivet contact and better scraping action.
  • Reverse Barrel configuration also available.
  • Sidebars are pierced and broach to a precise pitch tolerance to insure proper strand length and give more bearing surface in the hole to increase surface area for the press fit of the pin.
  • Automated welding is used on both the construction of the two piece barrel and the welding of the link.
Dimensions are given in inches.
1 - 6 of 6 | Results Per Page | View | Unit of Measure
1 

Item #

Attachment No.

Chain Number

Drawing

Dimension (S)

Dimension (B)

Dimension (G)

Dimension (T)

N/A C1 N/A WD104 N/A Steel-Drag-C1 Attachment Drawing
N/A 4.12 N/A 0.38 N/A 2.25 N/A 0.38
N/A C1 N/A WDH110 N/A Steel-Drag-C1 Attachment Drawing
N/A 9.12 N/A 0.38 N/A 2.25 N/A 0.38
N/A W1 N/A WD104 N/A Steel-Drag-W1 Attachment Drawing
N/A 12.00 N/A 1.88 N/A N/A 0.38
N/A W1 N/A WDH110 N/A Steel-Drag-W1 Attachment Drawing
N/A 17.00 N/A 1.88 N/A N/A 0.38
N/A W1 N/A WD120 N/A Steel-Drag-W1 Attachment Drawing
N/A 17.00 N/A 1.75 N/A N/A .50
N/A W1 N/A WDH480 N/A Steel-Drag-W1 Attachment Drawing
N/A 22.00 N/A 2.50 N/A N/A .50
1 - 6 of 6 | Results Per Page | View | Unit of Measure
1