Allied-Locke "H" Class Refuse Drag Chain is used for conveying abrasive waste materials through wooden or steel troughs. Because of this large, wide opening area, this chain provides sizeable carrying capacity when operated at moderate speeds. Links should always be run in the direction of the closed barrel.

Dimensions are given in inches.
1 - 7 of 7 | Results Per Page | View | Unit of Measure
1 

Item #

Pitch

Max. Allowable Sprocket Face (A)

Diameter of Pin (E)

Height of Sidebar (H)

Overall Width (N)

Overall Length of Barrel (X)

Max. Recommended Working Load

Sort by
N/A 8.000 N/A 13.00 N/A 0.625 N/A 1.62 N/A 16.38 N/A 14.44 N/A 6,100 lb
N/A 8.000 N/A 11.12 N/A 0.750 N/A 2.00 N/A 16.00 N/A 12.69 N/A 8,650 lb
N/A 8.000 N/A 9.00 N/A 0.625 N/A 1.50 N/A 12.50 N/A 10.62 N/A 6,100 lb
N/A 6.000 N/A 9.00 N/A 0.625 N/A 1.50 N/A 12.50 N/A 10.62 N/A 6,100 lb
N/A 6.000 N/A 8.75 N/A 0.750 N/A 2.00 N/A 12.88 N/A 10.19 N/A 8,200 lb
N/A 5.000 N/A 6.38 N/A 0.625 N/A 1.50 N/A 9.75 N/A 7.75 N/A 6,100 lb
N/A 6.000 N/A 4.12 N/A 0.625 N/A 1.50 N/A 7.50 N/A 5.31 N/A 6,100 lb
1 - 7 of 7 | Results Per Page | View | Unit of Measure
1