"H" Class Refuse Drag Chains On Allied-Locke Industries


	"H" Class Refuse Drag Chains
	Check up to five results to perform an action.

	Allied-Locke "H" Class Refuse Drag Chain is used for conveying abrasive waste materials through wooden or steel troughs. Because of this large, wide opening area, this chain provides sizeable carrying capacity when operated at moderate speeds. Links should always be run in the direction of the closed barrel. Dimensions are given in inches.
	larger image	larger image

Results Per Page :

Item #	Pitch	Max. Allowable Sprocket Face (A)	Diameter of Pin (E)	Height of Sidebar (H)	Overall Width (N)	Overall Length of Barrel (X)	Max. Recommended Working Load

H102	5.000	6.38	0.625	1.50	9.75	7.75	6,100 lb

H104	6.000	4.12	0.625	1.50	7.50	5.31	6,100 lb

H110	6.000	9.00	0.625	1.50	12.50	10.62	6,100 lb

H112	8.000	9.00	0.625	1.50	12.50	10.62	6,100 lb

H116	8.000	13.00	0.625	1.62	16.38	14.44	6,100 lb

H120	6.000	8.75	0.750	2.00	12.88	10.19	8,200 lb

H480	8.000	11.12	0.750	2.00	16.00	12.69	8,650 lb