Allied-Locke Indusries
Allied-Locke Indusries
1088 Corregidor, Green River
Industrial Park, Dixon, IL 61021
Toll Free: 800-435-7752
Email: info@alliedlocke.com
Print Back
Allied-Locke "H" Class Refuse Drag Chain is used for conveying abrasive waste materials through wooden or steel troughs. Because of this large, wide opening area, this chain provides sizeable carrying capacity when operated at moderate speeds. Links should always be run in the direction of the closed barrel.

Dimensions are given in inches.
"H" Class Refuse Drag Chains
Dimensions<!--H Class Refuse Drag Chains-->
Unit of Measure
Items "H" Class Refuse Drag Chains
H102
"H" Class Refuse Drag Chain 		"H" Class Refuse Drag Chains
H104
"H" Class Refuse Drag Chain 		"H" Class Refuse Drag Chains
H110
"H" Class Refuse Drag Chain 		"H" Class Refuse Drag Chains
H112
"H" Class Refuse Drag Chain 		"H" Class Refuse Drag Chains
H116
"H" Class Refuse Drag Chain
Pitch N/A 5.000 N/A 6.000 N/A 6.000 N/A 8.000 N/A 8.000
Max. Allowable Sprocket Face (A) N/A 6.38 N/A 4.12 N/A 9.00 N/A 9.00 N/A 13.00
Diameter of Pin (E) N/A 0.625
Height of Sidebar (H) N/A 1.50 N/A 1.50 N/A 1.50 N/A 1.50 N/A 1.62
Overall Width (N) N/A 9.75 N/A 7.50 N/A 12.50 N/A 12.50 N/A 16.38
Overall Length of Barrel (X) N/A 7.75 N/A 5.31 N/A 10.62 N/A 10.62 N/A 14.44
Max. Recommended Working Load N/A 6,100 lb
Avg. Ultimate Strength N/A 36,400 lb
Links per 10' N/A 24 N/A 20 N/A 20 N/A 15 N/A 15
Weight N/A 10.7 lb/ft N/A 8.0 lb/ft N/A 12.9 lb/ft N/A 10.8 lb/ft N/A 14.6 lb/ft
Cast Links N/A Allied-Locke Promal
Pins N/A Carbon Steel, Heat-Treated
Note N/A
  • Available in riveted construction only.
  • These links should always be run in the direction of the closed barrel.
    • Applications Served N/A conveyors forest products high-temperature industrial ovens produce washdown sugar harvesting water treatment