Item # H116, "H" Class Refuse Drag Chain On Allied-Locke Industries

Precision Roller Chains Agricultural Chains Engineering Class Chains & Buckets Environmental Products Sprockets

Search by Application

All Categories > Engineering Class Chains and Buckets > "H" Class, Mill, Drag and Transfer Chains > "H" Class Refuse Drag Chains > Item # H116


	Item # H116, "H" Class Refuse Drag Chain

Allied-Locke "H" Class Refuse Drag Chain is used for conveying abrasive waste materials through wooden or steel troughs. Because of this large, wide opening area, this chain provides sizeable carrying capacity when operated at moderate speeds. Links should always be run in the direction of the closed barrel.

Dimensions are given in inches.

larger image

Dimensions<!--H Class Refuse Drag Chains-->

larger image

Specifications · Applications Served

Specifications

Pitch		8.000

Max. Allowable Sprocket Face (A)		13.00

Diameter of Pin (E)		0.625

Height of Sidebar (H)		1.62

Overall Width (N)		16.38

Overall Length of Barrel (X)		14.44

Max. Recommended Working Load		6,100 lb

Avg. Ultimate Strength		36,400 lb

Links per 10'		15

Weight		14.6 lb/ft

Cast Links		Allied-Locke Promal

Pins		Carbon Steel, Heat-Treated

Note		Available in riveted construction only. These links should always be run in the direction of the closed barrel.

Applications Served

conveyors

forest products

high-temperature industrial ovens

produce washdown

sugar harvesting

water treatment

Engineering Class Chain Sprockets



	Engineering Class Chain Sprockets

Item # H116, "H" Class Refuse Drag Chain

Pitch

Max. Allowable Sprocket Face (A)

Diameter of Pin (E)

Height of Sidebar (H)

Overall Width (N)

Overall Length of Barrel (X)

Max. Recommended Working Load

Avg. Ultimate Strength

Links per 10'

Weight

Cast Links

Pins

Note